Discounted Product Bin
The products listed on this page are available at a discounted rate. Please contact the factory for details, pricing and purchasing information.
Factory Refurbished: Factory reworked and certified product in like-new condition. Carries full warranty and performance guarantee.
B-Stock: Open box items in like-new condition. Carries full warranty and performance guarantee.
C-Stock: Open box items with minor cosmetic blemishes and/or discontinued items in like-new condition. Carries 90 day warranty.
Discontinued: Discontinued items in new condition. Carries full warranty and performance guarantee.






HP-ACVT-DA2
Digital to Analog Audio Converter
Limited to inventory on-hand
Searching for an easy-to-use and affordable audio converter? Search no further. The HP-ACVT-DA2 from TechLogix seamlessly converts Toslink and SPDIF digital audio sources to analog stereo audio.- Technical Features
- Resources
- Accessories
- Installation
- FAQ
- SKUs
-
- Converts Coaxial or Toslink digital audio signals to analog L/R audio
- Dual analog outputs (RCA and 3.5mm)
- Supports sampling rate at 32, 44.1, 48 and 96 KHz.
- 24-bit SPDIF incoming bit stream on left and right channels
- Provides electromagnetic-noise-free transmission
- Easy to install and simple to operate
- Includes a 5V power supply
-
Specification Sheet
Design and Installation Guide
Manual
Product Video
Design Help
Installation Help -
{{ shop.money_format }}
-
- Power off the devices that will be connected to the HP-ACVT-DA2.
- Connect the audio source device to the Converter using appropriate Toslink or Coaxial cables.
- Connect the A/V Receivers or Amplifiers to the Converter using appropriate L/R cable.
- Insert the DC side of 5v power supply into the converter and then connect the AC side of the power supply into the wall outlet.
- Power on the devices that are now connected to the HP-ACVT-DA2.
-
What comes in the package?
Each HP-ACVT-DA2 includes one converter and one power supply.
Are both analog outputs live simultaneously?
Yes, both the RCA and 3.5mm outputs are live simultaneously.
Can I connect both Toslink and SPDIF sources at the same time?
Yes; however, active Toslink audio will take priority.
Does this unit decode multichannel audio?
No. 5.1 and 7.1 audio is not supported. The HP-ACVT-DA2 requires incoming stereo digital audio.
-
TechLogix SKU# 0001-0003






HP-SWHD-3X1
UltraHD HDMI Switcher - 3 Inputs
Limited to inventory on-hand
Searching for an easy-to-use and affordable HDMI switcher? Search no further. The HP-SWHD-3X1 switches three HDMI sources to a single HDMI display. Plus, a built-in autoswitching circuit makes the HP-SWHD-3X1 ideal for small conference rooms and classrooms.
For added versatility, the HP-SWHD-3X1 requires very minimal power, eliminating the need for a power supply in most applications and with most compatible products. It does include a USB power cable in the event that low power source or destination device is used.
- Technical Features
- Resources
- Accessories
- Installation
- FAQ
- SKUs
-
- Extremely compact design (3.4” x 2.3” x 0.7”)
- Extremely light (60 grams)
- 3 HDMI inputs to 1 HDMI output
- Switching via front panel or IR
- Built-in autoswitching between sources
- Supports resolutions up to 10G (4K@30)
- HDCP 1.4 and EDID compliant
- No power supply required
- Includes an IR remote control
- Supports multichannel audio, including Dolby TrueHD & DTS-HD Master Audio 7.1
-
Specification Sheet
Design and Installation Guide
Manual
Product Video
Design Help
Installation Help -
{{ shop.money_format }}
-
- Power off the devices that will be connected to the HP-SWHD-3X1.
- Connect the source devices to the switcher.
- Connect the destination device (typically a display) to the switcher.
- Power on the devices.
- Select the source you wish to view using the switch button on the HP-SWHD-3X1 or by using the included remote control.
-
What comes in the package?
Each HP-SWHD-3X1 includes one switcher, one power cable, one remote control and one IR receiver cable.
How does autoswitching work?
The HP-SWHD-3X1 senses the last live connection or power on and switches to that input.
How I mount the unit?
The HP-SWHD-3X1 is compact enough to be hidden most anywhere. If mounting is required, we recommend using double-sided Velcro™.
-
TechLogix SKU# 0001-0001






HP-SWHD-5X1
UltraHD HDMI Switcher - 5 Inputs
Limited to inventory on-hand
Searching for an easy-to-use and affordable HDMI switcher? Search no further. The HP-SWHD-5X1 switches five HDMI sources to a single HDMI display. Plus, a built-in autoswitching circuit makes the HP-SWHD-5X1 ideal for small conference rooms and classrooms.
For added versatility, the HP-SWHD-5X1 requires very minimal power, eliminating the need for a power supply in most applications and with most compatible products. It does include a USB power cable in the event that low power source or destination device is used.
- Technical Features
- Resources
- Accessories
- Installation
- FAQ
- SKUs
-
- Extremely compact design (3.4” x 2.3” x 0.7”)
- Extremely light (60 grams)
- 5 HDMI inputs to 1 HDMI output
- Switching via front panel or IR
- Built-in autoswitching between sources
- Supports resolutions up to 10G (4K@30)
- HDCP 1.4 and EDID compliant
- No power supply required
- Includes an IR remote control
- Supports multichannel audio, including Dolby TrueHD & DTS-HD Master Audio 7.1
-
Specification Sheet
Design and Installation Guide
Manual
Product Video
Design Help
Installation Help -
{{ shop.money_format }}
-
- Power off the devices that will be connected to the HP-SWHD-5X1.
- Connect the source devices to the switcher.
- Connect the destination device (typically a display) to the switcher.
- Power on the devices.
- Select the source you wish to view using the switch button on the HP-SWHD-5X1 or by using the included remote control.
-
What comes in the package?
Each HP-SWHD-5X1 includes one switcher, one power cable, one remote control and one IR receiver cable.
How does autoswitching work?
The HP-SWHD-5X1 senses the last live connection or power on and switches to that input.
How I mount the unit?
The HP-SWHD-5X1 is compact enough to be hidden most anywhere. If mounting is required, we recommend using double-sided Velcro™.
-
TechLogix SKU# 0001-0002



TL-2X1-HDVC
2x1 HDMI & VGA Switcher with Control
We’ve all experienced it…you walk into a meeting room and there are cables all over the place…a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…
The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants.
Enter the TL-2X1-HDVC. This compact switcher automatically manages the connections of two unique users or two unique connections—no more passing cables, pushing buttons, and untangling knots. The switcher automatically “senses” when someone plugs in an HDMI or VGA cable and makes their device live to the display. It’s the latest and greatest in automatic switching technology.
- Technical Features
- Resources
- Accessories
- Installation
- FAQ
- SKUs
-
- (1) HDMI input
- (1) VGA and 3.5mm stereo audio input
- (1) HDMI output
- Automatic switching with connection sensing
- 4K@60 4:2:0 support
- 1080p@60 support
- Built-in CEC controller for display control
- Manual switching via front panel buttons, RS232 & contact closures
- Manual display power on/off via front panel buttons or contact closure
- Built-in ESD and surge protection
-
Specification Sheet
Design and Installation Guide
Manual
Product Video
Design Help
API
Installation Help -
{{ shop.money_format }}
-
- Connect the TL-2X1-HDVC to up to two source devices using HDMI and VGA cables.
- Connect the TL-2X1-HDVC to the display using an HDMI cable.
- Connect the power supply (included in the package) to the TL-2X1-HDVC.
- Connect the power supply to an AC outlet or power source.
- Select the switching mode (automatic or manual) via the rear panel switch on the TL-2X1-HDVC.
- Select automatic display power on/off via the rear panel switch on the TL-2X1-HDVC.
- Connect an optional controller via RS232 or contact closure.
-
What comes in the package?
Each TL-2X1-HDVC includes a 2x1 switcher, mounting hardware and power supply.
What’s the max length of HDMI cable that I can connect to the switcher?
It really depends on the cable type and quality. Typically, we recommend using a twisted pair or fiber optic extender set for cable runs longer than 50 feet.
Do I need to power the unit?
Yes, the TL-2X1-HDVC requires power and ships with a power supply.
What does “automatic switching with connection sensing” really mean?
Automatic switching with connection sensing refers to how the TL-2X1-HDVC selects and shows content on the display. For example, there are two separate inputs on the switcher allowing two separate source devices (typically laptops, computers, tablets, or other portable devices) to be connected simultaneously. When someone physically connects their source device to an HDMI or VGA cable connected to the TL-2X1-HDVC it will “sense” someone connected and automatically switch to that channel, thereby showing the source device’s information on the display.
That’s great, but how does automatic switching different from traditional switchers?
Most switchers require “manual switching” through a remote control, the buttons on the switcher itself, or a stand-alone control system. They will not sense a connection and switch to the channel.
That makes sense, but I kind of like the idea of manually switching channels so I know exactly which device is showing on the display.
That’s fine…the TL-2X1-HDVC also facilitates manual switching through buttons on the front panel.
What happens if multiple source devices are connected at the same time and we want to switch channels? I thought you need a physical connection for the switcher to “sense” and switch?
Correct…sort of. When in an automatic switching mode, the TL-2X1-HDVC requires a physical sync in order to switch channels. The most common sync signals are generated when a cable is plugged or unplugged—it’s actually part of the magic of the digital video stream and the cables connecting devices. If you have multiple devices connected simultaneously (the TL-2X1-HDVC supports up to two) you will need to trigger a sync. The good news is a sync can be created without a physical plug or unplug. On computers, simultaneously hitting Ctrl + F7 typically forces a sync; therefore, the person who wants to show their device will hit Ctrl + F7. Computers do vary, so it’s probably worth familiarizing yourself with your device—sometimes Fn + F3, F4, F5, F8, F9 or F10 are necessary. Worse case, you can unplug the HDMI cable for three seconds and re-plug it in or control the TL-2X1-HDVC manually.
What happens if I am showing my content on the display and unplug my device?
The TL-2X1-HDVC will default to the other connected source device.
Where do I put the switcher in my room?
The TL-2X1-HDVC is pretty versatile, which is great because each room and system is different. Typically, we see the TL-2X1-HDVC mounted under the conference room table. Alternatively, it can also be placed on the table top, secured in a remote rack or credenza, or even mounted behind your display. Just make sure your cable runs are under 50 feet or you are using an active extender set.
What is CEC?
CEC, more properly known as Consumer Electronics Control, is a bi-directional control protocol that’s part of the HDMI stream. It allows devices connected with an HDMI cable to “talk” to each other; in practice this typically means when one device turns on, the connected device also turns on and switches to the connected input. And that’s exactly how the TL-2X1-HDVC uses CEC—when the switcher turns on, it sends a command to the display to turn on.
How does the ESD and surge protection work?
The TL-2X1-HDVC is designed with an internal protection circuit that will discharge up to +8kV of stray electricity, which can be a problem in areas prone to static electricity build up (think dry climates). This not only protects the switcher, but also the devices connected to the switcher.
-
TechLogix SKU# TL-2X1-HDVC



TL-2X2-HD
2x2 HDMI Matrix - 4k@30
{Discontinued 6-18-18}
The TL-2X2-HD is an affordable solution for applications requiring multiple displays, such as lecture halls, residential AV, houses of worship, retail and hospitality. Simply connect up to two high-definition sources and up to two high-definition displays. Switching is controlled remotely via IR and locally via intuitive buttons on the front panel.
- Technical Features
- Resources
- Accessories
- Installation
- FAQ
- SKUs
-
- (2) HDMI inputs
- (2) HDMI outputs
- Matrix switching of any input to any or all outputs
- Analog audio de-embedding on output channel 1
- Manual switching via IR and front panel buttons
- HDMI 1.4a / HDCP 1.4
- 4K@30 compliant
- 12-bit deep color compliant
- 3D compliant
- Built-in cable equalization & signal regeneration
- Built-in ESD and surge protection
-
Specification Sheet
Design and Installation Guide
Manual
Product Video
Design Help
Installation Help -
{{ shop.money_format }}
-
- Connect the TL-2X2-HD to up to two source devices using HDMI cables.
- Connect the TL-2X2-HD to up to two displays using HDMI cables
- Connect the power supply (included in the package) to the TL-2X2-HD.
- Connect the power supply to an AC outlet or power source.
-
What comes in the package?
Each TL-2X2-HD includes a 2X2 switcher, remote control and power supply.
What’s the max length of HDMI cable that I can connect to the switcher?
It really depends on the cable type and quality. Typically, we recommend using a twisted pair or fiber optic extender set for cable runs longer than 50 feet.
Do I need to power the unit?
Yes, the TL-2X2-HD requires power and ships with a power supply.
How does the ESD and surge protection work?
The TL-2X2-HD is designed with an internal protection circuit that will discharge up to +8kV of stray electricity, which can be a problem in areas prone to static electricity build up (think dry climates). This not only protects the switcher, but also the devices connected to the switcher.
-
TechLogix SKU# TL-2X2-HD





TL-4X1-HD
4x1 HDMI Switcher - 4k@30
Replaced by TL-4X1-HD2
We’ve all experienced it…you walk into a meeting room and there are cables all over the place…a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…
The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants.
Enter the TL-4X1-HD. This compact switcher automatically manages the connections of up to four unique users—no more passing cables, pushing buttons, and untangling knots. Each user gets their own cable and the system automatically “senses” when someone plugs in and makes their device live to the display. It’s the latest and greatest in automatic switching technology.
Installation and use is easy: place the TL-4X1-HD on or under the conference room table, run up to four HDMI cables to the different points on the table, and connect your devices (typically laptops, tablets, and phones). HDMI cables don’t need to move and the TL-4X1-HD handles user signal switching and distribution. You can even connect secondary audio-video inputs, such as BluRay players, dedicated computers, and cable boxes.
- Technical Features
- Resources
- Accessories
- Installation
- FAQ
- SKUs
-
• (4) HDMI inputs
• (1) HDMI output
• 4K@30 support
• 1080p@60 support
• Automatic switching with connection sensing
• Manual switching via IR, RS232 & front panel
• Audio Return Channel (ARC)
• Analog audio de-embedding -
Specification Sheet
Design and Installation Guide
Manual
Product Video
Design Help
Installation Help
CommWatch Software -
{{ shop.money_format }}
-
1. Connect the TL-4X1-HD to up to four source devices using HDMI cables.
2. Connect the TL-4X1-HD to the display using an HDMI cable.
3. If controlling the TL-4X1-HD remotely, connect the remote control cables (included in the package) to the TL-4X1-HD. If controlling the TL-4X1-HD automatically (through automatic sensing and switching), leave the control ports unconnected.
4. Connect the power supply (included in the package) to the TL-4X1-HD.
5. Connect the power supply to an AC outlet or power source.
6. Select the switching mode (automatic or manual) via the front panel button on the TL-4X1-HD. -
What comes in the package?
Each TL-4X1-HD includes a 4x1 switcher, mounting hardware (great for wall or under-table mounting), rubber feet for table top use, an RS232 control cable, an IR control cable, a wireless remote control, a power supply, and an installation guide.
What’s the max length of HDMI cable that I can connect to the switcher?
It really depends on the cable type and quality. Typically, we recommend using a twisted pair or fiber optic extender set for cable runs longer than 50 feet.
Do I need to power the unit?
Yes, the TL-4X1-HD requires power and ships with a power supply.
What does “automatic switching with connection sensing” really mean?
Automatic switching with connection sensing refers to how the TL-4X1-HD selects and shows content on the display. For example, there are four separate inputs on the switcher allowing four separate source devices (typically laptops, computers, tablets, or other portable devices) to be connected simultaneously. When someone physically connects their source device to an HDMI cable connected to the TL-4X1-HD it will “sense” someone connected and automatically switch to that channel, thereby showing the source device’s information on the display.
That’s great, but how does automatic switching different from traditional switchers?
Most switchers require “manual switching” through a remote control, the buttons on the switcher itself, or a stand-alone control system. They will not sense a connection and switch to the channel.
That makes sense, but I kind of like the idea of manually switching channels so I know exactly which device is showing on the display.
That’s fine…the TL-4X1-HD also facilitates manual switching through buttons on the front panel, IR and RS232. It even ships with a wireless remote control!
Wow, you really thought of everything. If I am controlling the switcher manually, do you recommend IR or RS232?
Most commercial contractors and installation professionals choose to use RS232 because it tends to be more customizable and reliable. Think of it like a cellphone (IR, which is based on light) versus a landline (RS232, which is based on electricity)—the cellphone works great most of the time, but sometimes the signal has a little bit of drop out and you need to repeat what you were saying. Your message will still get across, but it’s bit annoying pushing the button twice. The downside to RS232 is it tends to have a greater overall system cost—control systems that support RS232 are typically much more expensive. Honestly, we see most people use IR.
Let’s go back to the automatic switching…what happens if multiple source devices are connected at the same time and we want to switch channels? I thought you need a physical connection for the switcher to “sense” and switch?
Correct…sort of. When in an automatic switching mode, the TL-4X1-HD requires a physical sync in order to switch channels. The most common sync signals are generated when a cable is plugged or unplugged—it’s actually part of the magic of the HDMI stream and the HDMI cables connecting devices. If you have multiple devices connected simultaneously (the HDL-4X1-HD supports up to four) you will need to trigger a sync. The good news is a sync can be created without a physical plug or unplug. On computers, simultaneously hitting Ctrl + F7 typically forces a sync; therefore, the person who wants to show their device will hit Ctrl + F7. Computers do vary, so it’s probably worth familiarizing yourself with your device—sometimes Fn + F3, F4, F5, F8, F9 or F10 are necessary. Worse case, you can unplug the HDMI cable for three seconds and re-plug it in or control the HDL-4X1-HD manually.
What happens if I am showing my content on the display and unplug my device?
The HDL-4X1-HD will default to the another connected source device. Priority will be given to the lowest numbered input (the four inputs are numbered from 1 – 4).
What is the de-embedded audio output for? I thought an HDMI output would send video and audio to my display?
The HDMI output on the HDL-4X1-HD does send both audio and video to whatever display or device is connected. This works great if your display is a flat panel with built-in speakers; however, in some systems the display might be a projector or monitor without audio capabilities. In this case, the de-embedded audio output comes in extremely handy…digital audio is essentially decoded from the HDMI stream, converted to analog, and output on a 3.5mm (1/8”) connection. A standard audio cable can then connect the HDL-4X1-HD to an audio receiver, amplifier, or powered speaker.
Do you manufacture audio systems like this?
Funny you should ask! We do, and we offer several different systems. Check out Products > Audio in our menu above.
Where do I put the switcher in my room?
The HDL-4X1-HD is pretty versatile, which is great because each room and system is different. Typically, we see the HDL-4X1-HD mounted under the conference room table, and we include a mounting kit for under table use. Alternatively, it can also be placed on the table top, secured in a remote rack or credenza, or even mounted behind your display (the included mounting kit works great for this also). Just make sure your cable runs are under 50 feet or you are using an active extender set. -
TechLogix SKU# 1003-0201





TL-4X1-HD2
4x1 HDMI Switcher - 4k@60
We’ve all experienced it…you walk into a meeting room and there are cables all over the place…a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…
The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants.
Enter the TL-4X1-HD2. This compact switcher automatically manages the connections of up to four unique users—no more passing cables, pushing buttons, and untangling knots. Each user gets their own cable and the system automatically “senses” when someone plugs in and makes their device live to the display. It’s the latest and greatest in automatic switching technology.
Installation and use is easy: place the TL-4X1-HD2 on or under the conference room table, run up to four HDMI cables to the different points on the table, and connect your devices (typically laptops, tablets, and phones). HDMI cables don’t need to move and the TL-4X1-HD2 handles user signal switching and distribution. You can even connect secondary audio-video inputs, such as BluRay players, dedicated computers, and cable boxes.
The TL-4X1-HD2 incorporates 4K@60 and HDCP 2.2 support for the highest possible video experience, including HDR.- Technical Features
- Resources
- Accessories
- Installation
- FAQ
- SKUs
-
- (4) HDMI inputs
- (1) HDMI output
- 4K@60 support, including HDR
- 1080p@60 support
- Automatic switching with connection sensing
- Manual switching via IR, RS232 & front panel
- HDMI 2.0
- HDCP 2.2
-
Downloads
-
{{ shop.money_format }}
-
- Connect the TL-4X1-HD2 to up to four source devices using HDMI cables.
- Connect the TL-4X1-HD2 to the display using an HDMI cable.
- If controlling the TL-4X1-HD2 remotely, connect the remote control cables (included in the package) to the TL-4X1-HD2. If controlling the TL-4X1-HD2 automatically (through automatic sensing and switching), leave the control ports unconnected.
- Connect the power supply (included in the package) to the TL-4X1-HD2.
- Connect the power supply to an AC outlet or power source.
- Select the switching mode (automatic or manual) via the front panel button on the TL-4X1-HD2.
-
What comes in the package?
Each TL-4X1-HD2 includes a 4x1 switcher, mounting hardware (great for wall or under-table mounting), rubber feet for table top use, an RS232 control cable, an IR control cable, a wireless remote control, a power supply, and an installation guide.
What’s the max length of HDMI cable that I can connect to the switcher?
It really depends on the cable type and quality. Typically, we recommend using a twisted pair or fiber optic extender set for cable runs longer than 50 feet.
Do I need to power the unit?
Yes, the TL-4X1-HD2 requires power and ships with a power supply.
What does “automatic switching with connection sensing” really mean?
Automatic switching with connection sensing refers to how the TL-4X1-HD2 selects and shows content on the display. For example, there are four separate inputs on the switcher allowing four separate source devices (typically laptops, computers, tablets, or other portable devices) to be connected simultaneously. When someone physically connects their source device to an HDMI cable connected to the TL-4X1-HD2 it will “sense” someone connected and automatically switch to that channel, thereby showing the source device’s information on the display.
That’s great, but how does automatic switching different from traditional switchers?
Most switchers require “manual switching” through a remote control, the buttons on the switcher itself, or a stand-alone control system. They will not sense a connection and switch to the channel.
That makes sense, but I kind of like the idea of manually switching channels so I know exactly which device is showing on the display.
That’s fine…the TL-4X1-HD2 also facilitates manual switching through buttons on the front panel, IR and RS232. It even ships with a wireless remote control!
Wow, you really thought of everything. If I am controlling the switcher manually, do you recommend IR or RS232?
Most commercial contractors and installation professionals choose to use RS232 because it tends to be more customizable and reliable. Think of it like a cellphone (IR, which is based on light) versus a landline (RS232, which is based on electricity)—the cellphone works great most of the time, but sometimes the signal has a little bit of drop out and you need to repeat what you were saying. Your message will still get across, but it’s bit annoying pushing the button twice. The downside to RS232 is it tends to have a greater overall system cost—control systems that support RS232 are typically much more expensive. Honestly, we see most people use IR.
Let’s go back to the automatic switching…what happens if multiple source devices are connected at the same time and we want to switch channels? I thought you need a physical connection for the switcher to “sense” and switch?
Correct…sort of. When in an automatic switching mode, the TL-4X1-HD2 requires a physical sync in order to switch channels. The most common sync signals are generated when a cable is plugged or unplugged—it’s actually part of the magic of the HDMI stream and the HDMI cables connecting devices. If you have multiple devices connected simultaneously (the TL-4X1-HD2 supports up to four) you will need to trigger a sync. The good news is a sync can be created without a physical plug or unplug. On computers, simultaneously hitting Ctrl + F7 typically forces a sync; therefore, the person who wants to show their device will hit Ctrl + F7. Computers do vary, so it’s probably worth familiarizing yourself with your device—sometimes Fn + F3, F4, F5, F8, F9 or F10 are necessary. Worse case, you can unplug the HDMI cable for three seconds and re-plug it in or control the TL-4X1-HD2 manually.
What happens if I am showing my content on the display and unplug my device?
The TL-4X1-HD2 will default to the another connected source device. Priority will be given to the lowest numbered input (the four inputs are numbered from 1 – 4).
Where do I put the switcher in my room?
The TL-4X1-HD2 is pretty versatile, which is great because each room and system is different. Typically, we see the TL-4X1-HD2 mounted under the conference room table, and we include a mounting kit for under table use. Alternatively, it can also be placed on the table top, secured in a remote rack or credenza, or even mounted behind your display (the included mounting kit works great for this also). Just make sure your cable runs are under 50 feet or you are using an active extender set.
I noticed this device supports HDCP 2.2. What’s the big deal? Is it worth spending a bit extra?
HDCP 2.2 is latest evolution of content protection. In other words, it’s the magic part of the HDMI signal that keeps people from copying DVDs, BluRays, streaming video, and other protected content. If you are connecting the TL-4X1-HD to the latest HDMI gear, you will need HDCP 2.2 compatibility. Check your source and destination hardware specifications and look for HDCP 2.2 (as opposed to HDCP 2.0, HDCP 1.4 or an earlier version).
I noticed that some products are presented as 4K@30 and others are 4K@60. What’s the difference?
Let’s start by discussing how they are the same… both specifications support 4K, or Ultra High Definition (UHD), video with a 16:9 aspect ratio and a minimum resolution of 3840x2160 pixels (the little dots of color). Essentially, this means you will get a beautifully sharp picture that has four times more pixels than a 1080p high-definition TV. The difference is in the 30 versus the 60 (but I bet you already figured that out…)—these numbers refer to the “frame rate”, or the frequency at which frames in the video are displayed. A higher frame rate will result in a smoother image. This isn’t a big deal for spreadsheets, but it’s a huge deal for movies and video games.
-
TechLogix SKU# 1003-0213





TL-5X1-HDV
5x1 HDMI & VGA Switcher
We’ve all experienced it…you walk into a meeting room and there are cables all over the place…a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…
The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants.
Enter the TL-5X1-HDV. This compact switcher automatically manages the connections of up to five unique users—no more passing cables, pushing buttons, and untangling knots. Each user gets their own cable and the system automatically “senses” when someone plugs in and makes their device live to the display. Plus, HDMI and VGA dual connectivity ensure both new and old devices can connect to the system.
Installation and use is easy: place the TL-5X1-HDV on or under the conference room table, run up to three HDMI cables and two VGA cables to the different points on the table, and connect your devices (typically laptops, tablets, and phones). Cables don’t need to move and the TL-5X1-HDV handles user signal switching and distribution. You can even connect secondary audio-video inputs, such as BluRay players, dedicated computers, and cable boxes.- Technical Features
- Resources
- Accessories
- Installation
- FAQ
- SKUs
-
- (3) HDMI inputs
- (2) VGA inputs
- (1) HDMI output
- Scaling to WUXGA
- CEC enabled for source control
- Automatic switching with connection sensing
- Manual switching via IR, RS232 & front panel
- Analog audio de-embedding
- Analog audio embedding on all input channels
- Microphone input with phantom power
- Independent mic and line volume control
-
{{ shop.money_format }}
-
- Connect the TL-5X1-HDV to up to five source devices using HDMI and VGA cables.
- Connect the TL-5X1-HDV to the display using an HDMI cable.
- If controlling the TL-5X1-HDV remotely, connect the remote control cables (included in the package) to the TL-5X1-HDV. If controlling the TL-5X1-HDV automatically (through automatic sensing and switching), leave the control ports unconnected.
- Connect the power supply (included in the package) to the TL-5X1-HDV.
- Connect the power supply to an AC outlet or power source.
- Select the switching mode (automatic or manual) via the front panel button on the TL-5X1-HDV.
-
What comes in the package?
Each TL-5X1-HDV includes a 5x1 switcher, mounting hardware (great for wall or under-table mounting), rubber feet for table top use, an RS232 control cable, an IR control cable, a wireless remote control, a power supply, and an installation guide.
What’s the max length of HDMI cable that I can connect to the switcher?
It really depends on the cable type and quality. Typically, we recommend using a twisted pair or fiber optic extender set for cable runs longer than 50 feet.
Do I need to power the unit?
Yes, the TL-5X1-HDV requires power and ships with a power supply.
What does “automatic switching with connection sensing” really mean?
Automatic switching with connection sensing refers to how the TL-5X1-HDV selects and shows content on the display. For example, there are five separate inputs on the switcher allowing five separate source devices (typically laptops, computers, tablets, or other portable devices) to be connected simultaneously. When someone physically connects their source device to an HDMI or VGA cable connected to the TL-5X1-HDV it will “sense” someone connected and automatically switch to that channel, thereby showing the source device’s information on the display.
That’s great, but how does automatic switching different from traditional switchers?
Most switchers require “manual switching” through a remote control, the buttons on the switcher itself, or a stand-alone control system. They will not sense a connection and switch to the channel.
That makes sense, but I kind of like the idea of manually switching channels so I know exactly which device is showing on the display.
That’s fine…the TL-5X1-HDV also facilitates manual switching through buttons on the front panel, IR and RS232. It even ships with a wireless remote control!
Wow, you really thought of everything. If I am controlling the switcher manually, do you recommend IR or RS232?
Most commercial contractors and installation professionals choose to use RS232 because it tends to be more customizable and reliable. Think of it like a cellphone (IR, which is based on light) versus a landline (RS232, which is based on electricity)—the cellphone works great most of the time, but sometimes the signal has a little bit of drop out and you need to repeat what you were saying. Your message will still get across, but it’s bit annoying pushing the button twice. The downside to RS232 is it tends to have a greater overall system cost—control systems that support RS232 are typically much more expensive. Honestly, we see most people use IR.
Let’s go back to the automatic switching…what happens if multiple source devices are connected at the same time and we want to switch channels? I thought you need a physical connection for the switcher to “sense” and switch?
Correct…sort of. When in an automatic switching mode, the TL-5X1-HDV requires a physical sync in order to switch channels. The most common sync signals are generated when a cable is plugged or unplugged. If you have multiple devices connected simultaneously (the TL-5X1-HDV supports up to five) you will need to trigger a sync. The good news is a sync can be created without a physical plug or unplug. On computers, simultaneously hitting Ctrl + F7 typically forces a sync; therefore, the person who wants to show their device will hit Ctrl + F7. Computers do vary, so it’s probably worth familiarizing yourself with your device—sometimes Fn + F3, F4, F5, F8, F9 or F10 are necessary. Worse case, you can unplug the HDMI or VGA cable for three seconds and re-plug it in or control the TL-5X1-HDV manually.
What happens if I am showing my content on the display and unplug my device?
The TL-5X1-HDV will default to the another connected source device. Priority will be given to the lowest numbered input (the five inputs are numbered from 1 – 5).
What is the de-embedded audio output for? I thought an HDMI output would send video and audio to my display?
The HDMI output on the TL-5X1-HDV does send both audio and video to whatever display or device is connected. This works great if your display is a flat panel with built-in speakers; however, in some systems the display might be a projector or monitor without audio capabilities. In this case, the de-embedded audio output comes in extremely handy. A standard audio cable can then connect the TL-5X1-HDV to an audio receiver, amplifier, or powered speaker.
Do you manufacture audio systems like this?
Funny you should ask! We do, and we offer several different systems. Check out Products > Audio in our menu above.
Where do I put the switcher in my room?
The TL-5X1-HDV is pretty versatile, which is great because each room and system is different. Typically, we see the TL-5X1-HDV mounted under the conference room table, and we include a mounting kit for under table use. Alternatively, it can also be placed on the table top, secured in a remote rack or credenza, or even mounted behind your display (the included mounting kit works great for this also). Just make sure your cable runs are under 50 feet or you are using an active extender set.
Why are scaled outputs important?
Output scaling is actually a pretty big deal. This ensures a couple of things: 1) all the source devices will show up on your display even if they have different aspect ratios, and 2) switching between source devices will be very fast (as opposed to having a black screen, static, or dropped signal for several seconds).
What scaling outputs are supported?
The TL-5X1-HDV supports seven different output resolutions: 1920x1200, 1920x1080 (1080p), 1600x1200, 1360x768, 1280x720 (720p), 1280x800 and 1024x768.
I see the audio inputs and outputs, but these aren’t like any audio connectors I have ever used before.
Most people are familiar with RCA connectors (the kind on the back of your TV) or 3.5mm connectors (the kind on computers and portable devices), but not many people are familiar with terminal strip (also known as “Phoenix”) connectors. These little green connectors are commonly used by audio/video professionals because they allow bare wires to be connected in the field (which is a lot faster than soldering together audio cables) and tend to be more secure than RCA or 3.5mm connections. Terminal strip connectors are actually pretty easy to use, provided you recognize that audio wiring typically has a left side, right side, and ground. Simply take a standard RCA or 3.5mm cable, chop off one end, and strip back the bare wires from the jacket. The red cable is typically right, the white cable is typically left, and the remaining cable is the ground. The rear panel of the TL-5X1-HDV shows the connection order on the terminal strips.
-
TechLogix SKU# 1003-0215