TL-DA14-HD2

  • TL-DA14-HD2
  • TL-DA14-HD2
  • TL-DA14-HD2
  • TL-DA14-HD2

Limited stock currently available for this product

1x4 HDMI Splitter - 4k@60

1x4 HDMI Splitter - HDMI 2.0

The need to 'split' an HDMI signal is quite common. In residential applications, splitters are often used for sending a single cable box to multiple displays. In office applications, splitters are often used for sending a single computer to multiple monitors. In education applications, splitters are often used to send a video source to both a desktop monitor and a ceiling mounted projector. There are lots of use patterns, and they all revolve around the need to take a single HDMI source and send it to multiple destinations.

The TL-DA14-HD2 splits a single source to four destinations (typically displays or projectors). A built-in amplification circuit ensures performance for higher resolutions (1080p, 4K@30, and 4K@60) and longer cable lengths.

  • Technical Features
  • Resources
  • Accessories
  • Installation
  • FAQ
  • SKUs
    • (1) HDMI input
    • (4) HDMI outputs
    • 4K@60 support
    • 1080p@60 support
    • 3D support
    • HDMI 2.0
    • HDCP 2.2
  • Specification Sheet
    Design and Installation Guide
    Manual
    Product Video
    Design Help
    Installation Help

  • 1. Connect the TL-DA14-HD2 to your source device using an HDMI cable.
    2. Connect the TL-DA14-HD2 to your destination devices using HDMI cables.
    3. Connect the power supply (included in the package) to an AC outlet or power source.
    4. Whew, that was hard. Spend the rest of the day unwinding on the golf course.

  • What comes in the package?
    Each TL-DA14-HD2 includes one splitter and one power supply.

    What's the max length of HDMI cables that I can connect to the splitter?
    It really depends on the cable type and quality. Typically, we recommend using a twisted pair or fiber optic extender set for cable runs longer than 50 feet.

    Do I need to power the unit?
    Yes, the TL-DA14-HD2 requires power and ships with a power supply.

    I found a similar splitter online that doesn't need power and is a lot less expensive. Are you ripping me off?
    Well, our families need to eat too. But seriously... Splitters come in multiple formats, and in most cases you get what you pay for. Passive splitters (the kind that don't need power) are prone to signal loss because the device is essentially stealing power to operate - that and the fact that the HDMI signal is being halved or worse. Passive splitters are particularly problematic with longer cable runs and higher resolutions.

    So power is needed?
    Yeah, for this particular product. And if you are buying something from a different supplier, we still recommend you use an active (powered) splitter. Powered splitters are also known as 'distribution amplifiers' - they distribute the signal to multiple destinations and they amplify the signal to ensure performance. Seriously, you are spending $1,000+ on your display... it's not worth cheaping out on the connecting hardware and cabling.

    I noticed this device supports HDCP 2.2. What's the big deal? Is it worth spending a bit extra?
    HDCP 2.2 is latest evolution of content protection. In other words, it's the magic part of the HDMI signal that keeps people from copying DVDs, BluRays, streaming video, and other protected content. If you are connecting the TL-DA14-HD2 to the latest HDMI gear, you will need HDCP 2.2 compatibility. Check your source and destination hardware specifications and look for HDCP 2.2 (as opposed to HDCP 2.0, HDCP 1.4 or an earlier version).

    Do you offer a warranty on this device?
    We sure do. It's a standard one year limited warranty. Extended warranties are available from our integration partners and certified resellers.

  • TechLogix SKU#
    1003-0304

Similar Products

TL-FO2-HDC

18G HDMI & Control over Two Fiber Optic Cable Extender - VLC

TL-FO2-HDC2

HDMI 2.0 & Control over Two Fiber Optic Cable Extender - Uncompressed

TL-TP40-HDC2

18G HDMI & Control over Twisted Pair Cable Extender Set -- 40m

TL-IPFO-R01

AV over IP decoder (receiver) for fiber optic networks

TL-IPFO-T01

AV over IP encoder (transmitter) for fiber optic networks

TL-DA12-HD2

1x2 HDMI Splitter - 4k@60